HP AA979A - StorageWorks SAN Switch 2/8V Administrator'S Manual Download Page 164

Page: 164 / 465

166 Managing administrative domains

A port or device appears in CLI command output or other management tool outputs if any one of the

conditions listed in is met, see

Table 47

RASlog and SYSlog output is not filtered based on AD membership.
See the

Fabric OS Command Reference Manual

for more detailed information about command syntax and

usage and to understand how existing commands behave in an AD context.

Executing a command in a different AD context

The

ad --exec

option executes a command in a different Admin Domain. The Admin Domain must be

one to which you can access. This option creates a new shell with the current user_id, switches to the

specified Admin Domain, performs the specified command, and exits out of the shell.

How to execute a command in a different Admin Domain context

Connect to the switch and log in.

Enter the

ad --exec

command, specifying the Admin Domain and the command you want to

execute.

ad --exec

ad_id

command

The following example executes the

switchShow

command in the AD7 context.

Displaying an Admin Domain configuration

The

ad --show

option displays the membership information and zone database information of the

specified Admin Domain. Note the following differences in the information displayed based on the Admin

Domain:

•

AD255, if you do not specify the AD_name or number, all information about all existing Admin

Domains is displayed.

•

AD0-AD254 contexts, the membership of the current Admin Domain is displayed.

•

AD0, the device and switch list members are categorized into implicit and explicit member lists.

Table 47

Ports and devices in CLI output

For

Condition

(domain, port)

•

The port is specified in the (domain, port) member list of the Admin

Domain.

•

One or more WWNs specified in the AD member list is attached to the

(domain, port).

Device WWN

•

The device WWN is specified in the AD WWN member list.

•

The device WWN is attached to one of the (domain, port) specified in the

AD member list.

sw5:AD255:admin>

ad --exec 7 "switchshow"

Summary of Contents for AA979A - StorageWorks SAN Switch 2/8V


















































































































































































































































































































































































































































































Search results

Summary of Contents for AA979A - StorageWorks SAN Switch 2/8V

Reviews:

HP AA979A - StorageWorks SAN Switch 2/8V, Administrator'S Manual, Page: 164 / 465

Search results

Summary of Contents for AA979A - StorageWorks SAN Switch 2/8V

Reviews: