manualshive.com logo in svg

HP 1660CS, User Manual

The HP 1660CS User Manual is a comprehensive guide designed to assist users in operating their HP 1660CS product effectively. With step-by-step instructions and detailed illustrations, this manual is available for free download from manualshive.com, providing users with easy access to all the information they need.

Share
Download
background image

Reference Listing field

The Reference listing and Difference listing field is a toggle field that
switches the listing type between the Reference image listing and the
Difference listing.

The Reference listing is a display of the image (or template) that acquired
data is compared to during a comparison measurement. The boundaries of
the image (or size of the template) are controlled by using the channel
masking and compare range functions. Any bits in the reference listing
displayed as "X" have been set to don’t care bits during bit editing.

When the data listing is rolled, the difference data listing and the data listing
in the Listing menu are also rolled.

Difference Listing field

The Reference listing and Difference listing field is a toggle field that
switches the listing type between the Reference image listing and the
Difference listing.

The Difference listing is a display of the acquired data listing with the data
that differs, if any, from the Reference listing, highlighted with inverse video.
If the base is inverse-assembled symbols, the entire line is highlighted with
inverse video.

The controls that roll the listing in all three menus (the normal State listing,
the Reference listing, and the Difference listing) are synchronized unless the
number of pre-trigger states differ between the Reference listing and the
acquired data.  This means that when you change the current row position in
the Difference listing, the analyzer automatically updates the current row in
the acquired State listing and Reference listing, and vice-versa.

If the three listings are synchronized and you acquire data again, the
Reference listing may have a different number of pre-trigger states
depending on the  trigger criteria. The Reference listing can be
resynchronized to the State and Difference listings by entering the desired
state (acquisition memory) location from the front-panel keypad.

This allows you to view corresponding areas of all lists, to cross check
alignment, and to analyze the bits that do not match.

The Analyzer Compare Menu

Reference Listing field

7-68

Summary of Contents for 1660CS




























































































































































































































































































































































Reviews:

No comments

Related manuals for 1660CS

3nh HG Series Operation Manual preview
HG Series
Brand: 3nh Pages: 10
Bacharach 100 Operation & Maintenance Manual preview
100
Brand: Bacharach Pages: 64
Han Seung HTS-CT10 Operating Manual preview
HTS-CT10
Brand: Han Seung Pages: 2
janitza UMG 96 RM-EL Installation Manual preview
UMG 96 RM-EL
Brand: janitza Pages: 12
La Crosse Technology WS-7048U Instructional Manual preview
WS-7048U
Brand: La Crosse Technology Pages: 8
Lutron Electronics SL-4013 Operation Manual preview
SL-4013
Brand: Lutron Electronics Pages: 13
TSI Instruments Aerotrak 9303 Quick Start Manual preview
Aerotrak 9303
Brand: TSI Instruments Pages: 4
IFM SDG 50 Series Operating Instructions Manual preview
SDG 50 Series
Brand: IFM Pages: 38
Victron energy BMV-710H Manual preview
BMV-710H
Brand: Victron energy Pages: 46
SANKO SWT-7200 II Instruction Manual preview
SWT-7200 II
Brand: SANKO Pages: 97
Staco Energy EMD Quick Manual preview
EMD
Brand: Staco Energy Pages: 2
Kingfisher KI 9600A-Ge Operation & Maintenance Manual preview
KI 9600A-Ge
Brand: Kingfisher Pages: 52
LaMotte ColorQ 2x User Manual preview
ColorQ 2x
Brand: LaMotte Pages: 2
Hanna Instruments HI 991301 Instruction Manual preview
HI 991301
Brand: Hanna Instruments Pages: 2
Vogel 65 7120 Operation Manual preview
65 7120
Brand: Vogel Pages: 4
Vaisala K-PATENTS PR-23 AX Series Instruction Manual preview
K-PATENTS PR-23 AX Series
Brand: Vaisala Pages: 246
Fungilab V-Pad Instruction Manual preview
V-Pad
Brand: Fungilab Pages: 47
East Tester ET1080A User Manual preview
ET1080A
Brand: East Tester Pages: 36

Brands by name

Popular brands

Load more brands