HP 1660CS, User Manual

Page: 304 / 347

Range width 32 bits each
Timers 2
Timer value range 400 ns to 500 seconds
Glitch/Edge recognizers 2 (timing only)
Maximum glitch/edge width 136 channels in HP 1660CS, 102 channels in
HP 1661CS, 68 channels in HP 1662CS,
34 channels in HP 1663CS
Measurement and display functions
Displayed waveforms 24 lines maximum, with scrolling across 96
waveforms.
Measurement functions
Run/Stop functions Run starts acquisition of data in specified trace
mode.
Stop In single trace mode or the first run of a repetitive acquisition,
Stop halts acquisition and displays the current acquisition data. For
subsequent runs in repetitive mode, Stop halts acquisition of data and
does not change the current display.
Trace mode Single mode acquires data once per trace specification.
Repetitive mode repeats single mode acquisitions until Stop is pressed or
until the time interval between two specified patterns is less than or
greater than a specified value, or within or not within a specified range.
Indicators
Activity indicators Provided in the Configuration and Format menus
for identifying high, low, or changing states on the inputs.
Markers Two markers (X and O) are shown as vertical dashed lines on
the display.
Trigger Displayed as a vertical dashed line in the Timing Waveform
display and as line 0 in the State Listing display.
Specifications
Supplemental characteristics (logic analyzer)
11–7