HP 1660CS, User Manual

Page: 256 / 347

File types
There are seven file types on the HP 1660CS-series logic analyzer. In
addition, there are seven common filename endings.
Standard file types
The file type is shown in a small display box centered on the line above the
file listings.
autoload_file indicates the file, almost always named AUTOLOAD, is
an autoload file. The file description indicates if the autoload file is
enabled or disabled, and the file it autoloads. Autoload files are created
by executing "Autoload" in the System Disk menu.
166xan_config indicates the file is an analyzer configuration. These
files are created by executing "Store Analyzer" or "Store All" in the
System Disk menu.
166Xsc_config indicates the file is an oscilloscope configuration. These
files are created by executing "Store Scope" or "Store All" in the System
Disk menu.
16[6/7]x_cnfg indicates the file is a system configuration. These files
are created by executing "Store System" or "Store All" in the System Disk
menu.
DOS indicates the file is in DOS format. It might be a screenshot or a
file created on a PC and copied to the disk. These files are not loadable.
directory indicates the file is a directory and that you can change to
that directory. Other files are within it.
16[6/7]x_opt indicates the file is software that can be used with either
the HP 1660 or HP 1670 family of logic analyzers.
The File System
File types
9-5