manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 316 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 316

 response data separator   . A comma separates multiple pieces of

response data within a single   response message unit    .

Figure A-28.   response data separator 

 

response 

header 

separator 

 . A space (ASCII decimal 32) delimits the

response header, if returned, from the 

 or only piece of data.

Figure A-29. c response header separator 

c response message unit separator 

 . A semicolon delimits the

 response message unit     if multiple responses are returned.

Figure A-30.   response message unit separator 

C response message terminator 

 . A <response message terminator 

(NL) terminates a complete   response message   . It should be read

from the instrument along with the response itself.

Message Communication and System Functions
A-28

HP 

 16518

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments