manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 261 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 261

MMODe

MMODe

Command Syntax:

Example:

Query Syntax:

Returned Format:

where

 marker-mode 

Example:

HP 

 16518

Programming Reference

command/query

The MMODe (Marker Mode) command selects the mode controlling
marker movement and the display of the marker readouts. When

 is selected, the markers will be placed on patterns. When

TIME is selected, the markers move on time. In MSTats, the markers are
placed on patterns, but the readouts will be time statistics.

The MMODe query returns the current marker mode.

 

 

 

 

OUTPUT XXX;

 TIME”

 

   marker-mode     

::   

 

 

 MSTats}

  D I M  

 

20 OUTPUT XXX;”
30 ENTER XXX; 
40 PRINT 
50 END

 Subsystem

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments