manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 315 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 315

Figure 

A-26. 

c definite length arbitrary block response data 

HP 

 16518

Programming Reference

Where c ASCII data byte   represents any ASCII-encoded data byte 

 NL   

 10 decimal).

Notes

1. The END message provides an unambiguous termination to an element

that contains arbitrary ASCII characters.

2. The IEEE 483.1 END message serves the 

 function of terminatii

this element as 

 as terminating the   RESPONSE MESSAGE    .

It is only sent once with the last byte of the indefinite block data. The
NL is present for consistency with the

 RESPONSE MESSAGE TERMINATOR   . Indefinite block data

format is not supported in the HP 

Figure A-27. c arbitrary ASCII response data 

Message Communication and System Functions

A-25

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments