manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 135 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 135

WLlSt Subsystem

Introduction

Two commands in the 

 subsystem control the X and 0 marker

placement on the waveforms portion of the Timing/State mixed mode
display. These commands are 

 and 

 The 

 and

 queries return what states the X and 0 markers are on. Since the

markers can only be placed on the timing waveforms, the queries return

what state (state acquisition memory location) the marked pattern is

stored in.

In order to have mixed mode, one machine must be a timing analyzer and

Note 

   

t e o er must be a state 

 with time tagging on (use

 c N   :STRace:TAG TIME).

time-value 

= real number

Figure 9-l. WLlSt Subsystem Syntax Diagram

HP 

 

Programming Reference

WLlSt Subsystem

9-l

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments