manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 211 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 211

SWAVeform Subsystem

Introduction

The commands in the State Waveform subsystem allow you to configure
the display so that you can view state data as waveforms on up to 24
channels identified by label name and bit number. The five commands are
analogous to their counterparts in the Timing Waveform subsystem.
However, in this subsystem the x-axis is restricted to representing only
samples (states), regardless of whether time tagging is on or off. As a
result, the only commands which can be used for scaling are 

 and

The way to manipulate the X and 0 markers on the Waveform display is

through the State Listing 

 subsystem. Using the marker commands

from the 

 subsystem will affect the markers on the Waveform display.

HP 

 1651B

Programming Reference

The commands in the SWAVeform subsystem are:

l 

l 

l 

l 

l 

SWAVeform Subsystem

14-1

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments