HP 1650B, Programming Reference Manual, Page: 115 / 346

auto-file
= string
of
up to alphanumeric characters representing a name.
name
= string
of
up to 10 characters representing a name.
description
= string
of
up to 32 alphanumeric characters.
type
= integer,
refer
to table 7-l.
block-data
= data in IEEE 488.2
# fonnat.
=
of
up to 10 alphanumeric characters representing a name.
new-name
= string
of
up to 10 alphanumeric characters representing a valid name.
Figure 7-1. Subsystem Commands Syntax Diagram (continued)
Note
Refer to “Disk Operations” in chapter 6 of the
HP 16518
Front-Panel Reference
manual for a description of a valid file name.
HP
Programming Reference
Subsystem
7-3