SLAVe
SLAVe
command/query
The SLAVe clock command allows you to specify a slave clock for a given
machine. The slave clock is only used in the Mixed and Demultiplexed
clocking modes. Each command deals with only one clock
therefore, a complete clock specification requires five commands, one for
each clock. Edge specifications
or BOTH) are
Level specifications (LOW or HIGH) are
Note
The slave clock must have at least one edge specified.
The SLAVe query returns the clock specification for the specified clock.
Command Syntax:
<clock-id
where:
c clock-id
: : =
clock-spec
:: =
BOTH LOW HIGH}
Example:
OUTPUT
J, RISING"
Query Syntax:
1
c clock-id
Returned Format:
1
<clock-id ,
Example:
10 DIM
20 OUTPUT
<clock-id>”
30 ENTER XXX
40 PRINT
50
END
Subsystem
HP
16518
Programming Reference