manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 219 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 219

 Subsystem

15

Introduction

The State Chart subsystem provides the commands necessary for
programming the HP 

 Chart display. The commands allow

you to build charts of label activity, using data normally found in the
Listing display. The chart’s y-axis is used to show data values for the label
of your choice. The x-axis can be used in two different ways. In one, the
x-axis represents states (shown as rows in the State Listing display). In the

other, the x-axis represents the data values for another label. When states
are plotted along the x-axis, X and 0 markers are available. Since the

State Chart display is simply an alternative way of looking at the data in
the State Listing, the X and 0 markers can be manipulated through the

 subsystem. In fact, because the programming commands do not

force the menus to switch, you can position the markers in the 
subsystem and see the effects in the State Chart display.

The commands in the 

 subsystem are:

l 

Accumulate

 

l 

HP 

 1651B

Programming Reference

 Subsystem

15-1

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments