manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 232 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 232

FIND

FIND

The FIND query is used to get the line number of a specified difference

occurrence (first, second, third, etc) within the current compare range, as
dictated by the 

 command (see 

 A difference is counted

for each line where at least one of the current labels has a difference
between its acquired state data listing and its compare data image.

Invoking the FIND query updates both the Listing and Compare displays
so that the line number returned is in the center of the screen.

Query Syntax:

   

 <difference-occurrence>

Returned Format:

   

<difference-occurrence 

 number> 

where:

 difference occurrence 

:: = integer from 0 to 1024

 line number 

:: = integer from -1023 to + 1023

Example:

10 DIM 

20 OUTPUT XXX;"

  2 6 ”

 ENTER 

XXX; 

40 PRINT 

50 END

 Subsystem

1 6 - 8

HP 

 

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments