manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 146 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 146

command

The 

 command causes the current analyzer (machine) to

 if the current machine is a timing analyzer. If the current

machine is not a timing analyzer, the 

 command is ignored.

 is an Overlapped Command. Overlapped Commands allow

execution of subsequent commands while the logic analyzer operations
initiated by the Overlapped Command are still in progress. Command
overlapping can be avoided by using the *OPC and *WAI commands (see
the chapter “Common Commands”) in conjunction with 

Note 

Command Syntax:

Example:

 Subsystem

When the 

 command is issued, existing timing analyzer

configurations are erased and the other analyzer is turned off.

 1 

OUTPUT 

HP 

 16518

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments