manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 188 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 188

COLumn

COLumn

command/query

The COLumn command allows you to configure the state analyzer
list display by assigning a label name and base to one of the eight vertical
columns in the menu. A column number of 1 refers to the left most
column. When a label is assigned to a column it replaces the original label

in that column. The label originally in the specified column is placed in

the column the specified label is moved from.

When the label name is “TAGS,” the TAGS column is assumed and the
next parameter must specify 

 or 

The COLumn query returns the column number, label name, and base for
the specified column.

Command Syntax:

 

   ,   label-name 

   base 

where:

  n u m r

: : =  

 

<label-name 

:: = a string of up to 6 alphanumeric characters

 base 

:: =   

  

   

  

  

  

  

 for labels

or

:: = 

   

 for tags

 Subsystem

13-6

HP 

 

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments