manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 298 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 298

Device Listening

The listening syntax of IEEE 488.2 is designed to be more forgiving than

Syntax

the talking syntax. This allows greater flexibility in writing programs, as
well as allowing them to be easier to read.

Upper/Lower Case Equivalence. 

Upper and lower case letters are

equivalent. The mnemonic SINGLE has the same semantic meaning as

the 

 single.

c 

white space 

 . <white space   

is 

defined to be one or more characters

from the ASCII set of 0   32 decimal, excluding 10 decimal (NL). 
space   is used by several instrument listening components of the syntax
It is usually optional, and can be used to increase the readability of a
program.

Figure A-2. <white space 

Message Communication and System Functions

A-6

HP 

 

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments