CPERiod
CPERiod
command/query
The CPERiod command allows you to set the state analyzer for input
clock periods of greater than or less than 60
Either LT or GT can be
specified. LT signifies a state input clock period of less than
ns, and
GT signifies a period of greater than
ns.
Because count tagging requires a minimum clock period of 60
the
CPERiod and TAG commands are interrelated (the TAG command is in
the
subsystem).
the clock period is set to Less Than, count
tagging is turned off. When count tagging is set to either state or time, the
clock period is automatically set to Greater Than.
The CPERiod query returns the current setting of clock period.
Command Syntax:
1
GT}
where:
GT
:: = greater than 60 ns
:: = less than 60 ns
Example:
OUTPUT
GT”
Query Syntax:
:MACHine{l
Returned Format:
1
{GT LT} c
Example:
10 DIM
OUTPUT XXX;”
30 ENTER XXX;
40 PRINT
END
HP
16518
Programming Reference
Subsystem
11-5