manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 179 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 179

TAG

TAG

command/query

The TAG command selects the type of count tagging (state or time) to be

performed during data acquisition. State tagging is indicated when the
parameter is the state tag qualifier, which will be counted in the qualified
state mode. The qualifier may be a single term or a complex expression.

The terms A through H are defined by the TERM command. The terms

 and 

 are defined by the 

 command.

Expressions are limited to what you could manually enter through the

Format menu. Regarding parentheses, the syntax definitions below show

only the required ones. Additional parentheses are allowed as long as the

meaning of the expression is not changed. A detailed example is provided

in figure 12-2.

Because count tagging requires a minimum clock period of 60 

 the

 and TAG commands are interrelated (the 

 command

is in the 

 subsystem). When the clock period is set to Less

Than, count tagging is turned off. When count tagging is set to either state
or time, the clock period is automatically set to Greater Than.

The TAG query returns the current count tag specification.

Command Syntax:

:MACHine{l 

 {OFF   TIME   

where:

 state-tag-qualifier 

:: =   

   

   c any-term   

 any-term 

 expression1 

 expression2 

 

 term1 

 

 

HP 

 16518

Programming Reference

   [{AND 

 

 

 expression2   [{AND   OR}   expression1     

::     

     

     

     

:: =   

   [OR 

 

   

   [AND 

 

:: =   

 [OR 

   

 [AND 

 

: :   =  

    N O T B     N O T C     N O T D    

   

: : =  

: : =  

 Subsystem

12-19

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments