manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 3 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 3

Product

Warranty

This Hewlett-Packard product has a warranty against defects in material
and workmanship for a period of one year from date of shipment. During

warranty period, Hewlett-Packard Company will, at its option, either

repair or replace products that prove to be defective.

For warranty service or repair, this product must be returned to a service

facility designated by Hewlett-Packard. However, warranty service for

products installed by Hewlett-Packard and certain other products

designated by Hewlett-Packard will be performed at the Buyer’s facility at

no charge within the Hewlett-Packard service travel area. Outside
Hewlett-Packard service travel areas, warranty service will be performed
at the Buyer’s facility only upon Hewlett-Packard’s prior agreement and
the Buyer shall pay Hewlett-Packards round trip travel expenses.

For products returned to Hewlett-Packard for warranty service, the Buyer
shall prepay shipping charges to Hewlett-Packard and Hewlett-Packard
shall pay shipping charges to return the product to the Buyer. However,
the Buyer shall pay all shipping charges, duties, and taxes for products
returned to Hewlett-Packard from another country.

Hewlett-Packard warrants that its software and 

 designated by

Hewlett-Packard for use with an instrument will execute its programming
instructions when properly installed on that instrument. Hewlett-Packard
does not warrant that the operation of the instrument software, or
firmware will be uninterrupted or error free.

Limitation of Warranty

The foregoing warranty 

 not apply to defects resulting from improper

or inadequate maintenance by the Buyer, Buyer-supplied software or
interfacing, unauthorized modification or misuse, operation outside of the
environmental specifications for the product, or improper site preparation
or maintenance.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED.
HEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE
IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments