manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 122 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 122

LOAD

LOAD

 bler

command

This variation of the LOAD command allows inverse assembler files to be

loaded into analyzer 1 or analyzer 2 of the HP 

 The

c 

 name   parameter specifies the inverse assembler filename. The

 after the   IA-name   parameter specifies into which

machine the inverse assembler is loaded.

l 

’

Note 

Inverse assembler files should only be loaded into the state analyzer. If an
inverse assembler file is loaded into the timing analyzer no error will be
generated; however, it will not be accessible.

Command Syntax:

     

where:

 IA-name 

:: = string of up to 10 alphanumeric characters representing a valid file name

Examples:

OUTPUT XXX;“:MMEMORY:LOAD:IASSEMBLER 
OUTPUT 

 

 Subsystem

7-10

HP 

 

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments