manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 156 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 156

MASTer

MASTer

command/query

The MASTer clock command allows you to specify a master clock for a
given machine. The master clock is used in all clocking modes (Normal,

Mixed, and Demultiplexed). Each command deals with only one clock
(J,K,L,M,N); therefore, a complete clock specification requires five
commands, one for each clock. Edge specifications 

 

 or

BOTH) are 

 Level specifications (LOW or HIGH) are 

Note 

At least one clock edge must be specified.

The MASTer query returns the clock specification for the specified clock.

Command Syntax:

 

where:

 

::= 

 clock-spec 

::= 

Example:

OUTPUT 

 

 RISING"

Query Syntax:

:MACHine{l 

 

 

Returned Format:

 

   , <clock-spec     

Example:

10 DIM 

20 OUTPUT 
30 ENTER XXX 

40 PRINT 

50 

END

 Subsystem

11-8

HP 

 16518

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments