manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 299 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 299

 program message 

 . The   program message   is a complete message

to be sent to the instrument. The instrument will begin executing
commands once it has a complete   program message   , or when the
input buffer becomes full. The parser is also repositioned to the root of
the command tree after executing a complete   program message    .

Refer to the “Tree Traversal Rules” in the “Programming and

Documentation Conventions” chapter for more details.

HP 

 16518

Figure A-3.   program message 

 program message unit 

 . The   program message unit   is the

container for individual commands within a 

 program message 

 

  u n i t >

Figure A-4. c program message unit 

Message Communication and System Functions

A-9

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments