manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 260 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 260

command

The INSert command inserts waveforms in the timing waveform display.
The waveforms are added from top to bottom. When 24 waveforms are
present, inserting additional waveforms replaces the last waveform .

The first parameter specifies the label name that will be inserted. The
second parameter specifies the label bit number or overlay.

If 

 is specified, all the bits of the label are displayed as a

composite overlaid waveform.

Command Syntax:

 1 

   label-name       bit-id     

where:

c label-name 

:: = string of up to 6 alphanumeric characters

 id 

:: = integer from 0 to 31

Example:

OUTPUT 

 

 Subsystem

1 9 - 8

HP 

 

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments