manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 30 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 30

Note 

A command or query may be sent in either 

 or shortform, or in

any combination of iongform and shortform. The HEADER and

 commands only control the format of the returned data

and have no effect on the way commands are sent.

Refer to the chapter “System Commands” for information on turning the
HEADER and 

 commands on and off.

Response Data

Both numbers and strings are returned as a series of ASCII characters, as

Formats

described in the following sections. Keywords in the data are returned in
the same format as the header, as specified by the 

 command.

Like the headers, the keywords will always be in upper-case.

The following are possible responses to the 

 TFORMAT:

LAB? ‘ADDR’   query.

 

 

 terminator> (Header on;

 on)

 

 

   (Header on; 

 off)

 

   (Header off; 

 on)

 

 (Header off; 

 off)

 to the individual commands in this manual for information on the

 (alpha or numeric) of the data returned from each query.

introduction to Programming an Instrument

1-14

HP 

 

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments