manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 294 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 294

Protocol Exceptions

If an error occurs during the information exchange, the exchange may not
be completed in a normal manner. Some of the protocol exceptions are
shown below.

Command Error. 

A command error will be reported if the instrument

detects a syntax error or an unrecognized command header.

Execution Error. 

An execution error will be reported if a parameter is

found to be out of range, or if the current settings do not allow execution
of a requested command or query.

Device-specific Error. 

A device-specific error will be reported if the

instrument is unable to execute a command for a strictly device dependent
reason.

Query 

Error. 

A query error will be reported if the proper protocol for

reading a query is not followed. This includes the interrupted and

unterminated conditions described in the following paragraphs.

Message Communication and System Functions

A-4

HP 

 16518

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments