manualshive.com logo in svg

HP 1650B, Programming Reference Manual, Page: 116 / 346

Share
Download
HP 1650B Programming Reference Manual Download Page 116

Command Syntax:

where:

<auto-file 

Examples:

Query Command:

Returned Format:

Example:

 Subsystem

7-4

command/query

The 

 command controls the 

 feature which designates

a configuration 

 to be loaded automatically the next time the

instrument is turned on. The OFF parameter (or 0) disables the 
feature. When a string parameter is specified it represents the desired

 file.

The 

 query returns 0 if the 

 feature is disabled. If the

 feature is enabled, the query returns a string parameter that

specifies the current 

 file.

{{OFF 

   c auto-file   

:: = string of up to 10 alphanumeric characters

OUTPUT 

 OFF"

OUTPUT 

 

OUTPUT 

 

[ : M M E M o r y : A U T o l o a d ]

 <auto-file>     

 DIM 

20 OUTPUT XXX;" :MMEMORY:AUTOLOAO?"

 ENTER 
 PRINT 

50 END

HP 

 16518

Programming Reference

Summary of Contents for 1650B



























































































































































































































































































































































Reviews:

No comments