Maintenance location
Work instructions
Interval
Air supply grille
Clean internally and externally from residues
40 h
Metering discs
for wear
40 h
Push-out wheels
for wear
40 h
Wheels / brakes
Undercarriage / wheels
Check for damage (cracks, etc.)
daily
Check fastening / retighten wheel nuts - see above
see above
Check air pressure (undercarriage)
• 710/50-26.5: 4.0 bar
• 500/85 R24: 2.6 bar
• 270/95 R36: 4.0 bar
daily
Bearings of carrying axle journals
Check clearance and adjust if necessary (must only be
carried out by an expert workshop)
1 2 0 h /
6 months
Brake system
Check condition and function
daily
Drain air reservoir
daily
Check brake lines and hoses for damages, crushing points
and kinks
daily
Check brake linings for wear.
Use the inspection opening on the rear of the brake, if so
equipped.
Replace the brake lining when fallen below the minimum
thickness:
> 5 mm
40 h
Safety installations
Lighting and warning boards
Check condition and function
daily
Warning and safety stickers
Check that they are in place and legible
40 h
After the season / before extended idle times
Complete machine
Perform care and cleaning work; do not spray plastic parts with oil or similar
Spray the piston rods of the hydraulic cylinder with a suitable corrosion
protection agent
Check all screw and plug-and-socket-connections for firm seating (see
torque table)
Check frame and connecting parts for condition and firm seating
Check electrical lines for damage and replace, if necessary.
Store terminal in a dry place
Brake system
Release parking brake, drain air reservoir, close brake lines, check
setting
Single grain metering units
Open, clean with air and brush, check for damage
NOTES:
•
The maintenance interval
Daily
designates maintenance on each working day before each use and each road travel.
•
Follow additional maintenance notes in the respective chapters.
131
Summary of Contents for Maestro 12.45 CV
