Agitator shaft
WARNING
Danger of injury
¾
Open the flap for residual quantity emptying
only when the machine has been shut down
and secured against restarting.
¾
Never operate the agitator shaft with the
clearing valve open.
¾
Make sure before selecting the agitator shaft
that no persons are present in the danger zone.
During transport travel fertiliser is compressed
through shocks and vibration and can adhere
to the hopper.
To prevent this, the fertiliser is loosened up with
two agitator fingers. The agitator fingers are
operated by a hydraulic cylinder (1) outside the
fertiliser hopper and moved automatically during
lift-out.
The agitator shaft is secured against overload
with a shearing bolt (M8 x 60) (2).
3
2
1
Fertiliser hopper agitator shaft
The agitator shaft is mounted to the standard
opening for residual emptying. The opening for
residual emptying is located below the agitator
shaft (3) after assembly.
¾
Close the closure of residual emptying tightly
and check for leak tightness to avoid metering
errors.
AutoForce
See separate operating instructions
AutoForce.
NOTE
2
1
The machine must be in the correct working
position for AutoForce to function correctly, see
chapter
Seed bar adjustment
:
•
The fertiliser tower must be aligned vertically.
•
The seed bar (1) must be aligned horizontally.
•
The parallelograms of the drill units (2) must
be aligned horizontally.
Fertiliser flow monitoring
¾
See operating instructions for the drill controls.
122
123
Summary of Contents for Maestro 12.45 CV
