horsch 80910205, Operating Instructions Manual

Page: 148 / 218

14.1.5 Fuel prefilter change
The shut-off valve (1) can be used to drain the water from
the fuel prefilter.
To change the fuel prefilter take off the transparent
housing (2) and unscrew the cartridge (3). Insert the new
cartridge, mount the transparent housing (2) and operate
the hand pump (4) to bleed.
14.1.5.1 Filling the fuel prefilter
• Loosen the bleeding screw (5).
• Keep pressing the hand pump, until fuel runs out of
the bleeding screw (5) without air bubbles. Do not con-
tinue pumping.
• Tighten the bleeding screw (5).
14.1.5.2 Changing the fuel filter element
Change the filter cartridge at least once per year.
• Loosen the filter cartridge (6).
• Tighten the new filter hand-tight and bleed with the
hand pump.
2
4
1
3
14.1.6 Fuel / AdBlue
Do not refuel or fill up AdBlue while the
engine is running. Smoking prohibited!
Quality and cleanliness of fuel are of fundamental impor-
tance for a uniform excellent power and a long lifetime of
the engine.
Always refuel every day after the end of work to pre-
vent the formation of moisture and freezing of the fuel
system.
Diesel fuels: Fill in only commercially available, sulphur free diesel fuel complying with the Euro -
pean Standard EN 590, status later than 2010 ff. (max. 0.001 % of sulphur by weight).
AdBlue: When using the vehicle without AdBlue /DEF, the type approval becomes null and void.
Legal consequence: The vehicle must no longer be used on public roads.
If the AdBlue level has dropped down to approx. 10%, a warning lamp will light up in the control
terminal. AdBlue should be filled up in due time! If the level drops further down to approx. 2.5%,
the engine power will be reduced.
5
5
6
148