horsch 80910205, Operating Instructions Manual

Page: 106 / 218

2
3
1
10.7 Suction filter
The suction filter is located on the left side of the vehicle
between the axles. The mesh size of the screen insert is
20 meshes/inch.
Cleaning the screen insert:
• Close the four-way valve (toggle switch position
"CLOSE").
• Let the residual fluid run out through the drain into a
suitable container.
• Attach a filter wrench to the hexagon (1), loosen the
lock and pull off the filter cap.
• Remove and clean the screen.
• Reinsert the screen into the filter housing and assem-
ble the filter cap with spigot nut.
10.8 Pressure filter
The pressure filter is located on the left hand side of the
boom tower. In case of more coarse contamination un-
screw the filter cap. For this purpose set all switches on
the Commander-Box to "OFF/CLOSED". Open the white
pressure filter head (2) with a special spanner (included
in the scope of delivery) and clean the filter element;
reinsert the element and screw the filter cap back on. (3)
Pressure filter cleaning connection.
10.9 Agitator
The wash container is equipped with an agitator. This
agitator is a hydraulic agitator. The agitator tube is
fitted with special injector nozzles to boost the agitating
intensity. The switched on agitator mixes the wash inside
the wash container and thus ensures a homogeneous
wash. The agitator (1) can be infinitely adjusted in the
"C-Box" or via the terminal.
A pressure gauge (2) shows the agitating power in form
of pressure in the agitator.
The agitator can also be switched off completely via the
terminal, in order to minimize the residual amount inside
the wash container.
Automatic function: Below 250 litres, the agitator switches
off.
10.10 Filling level gauge Tank-Control
The Tank-Control (3) digitally shows the filling level in the
wash container on the filling location and in the terminal.
Once the specified filling quantity has been reached, the
pump will automatically shut down.
2 3
1
106