horsch 80910205, Operating Instructions Manual

Page: 172 / 218

1
2
6
5
4
3
15 Tilting the tank installation
The complete tank installation can be tilted to the back
for repair work on the carrier vehicle.
Tilt the tank installation and the fresh
water tank only when empty!
• Remove the rear screws for tower support (1) (right
and left).
• Unscrew the left and right nuts (2) from the front
tank support.
• Loosen the connecting hoses (3) and (4) to the
illuviation valve.
• Loosen the connecting hoses (5) and (6).
• Disconnect all electric plug connections (7) and (8).
• Loosen both hose clamps (9) on the pressure filter.
• Drain the fresh water tank, loosen the clamp (10).
• Carefully lift the tank installation at the front by the
plates (11) for approx. 70 cm, using appropriate
lifting gear.
• Insert a supporting device at a suitable place.
Never access the area under the raised
tank installation without a safe support.
172