horsch 80910205, Operating Instructions Manual

Page: 49 / 218

3.2.5 Ignition lock
The ignition lock (3) has 4 positions:
0 - Off
I - Electric circuit for electronics is switched on
II - Ignition is switched on
III - Start position
3.2.6 Quick stop button
Actuating the quick stop button (1) deactivates the travel
drive and the machine comes to a halt, all work functions
are stopped.
• Press quick stop button (1):
The machine comes to a halt, all work functions are
stopped.
• To activate the machine return the actuated quick stop
button (1) by turning it slightly clockwise.
3.2.7 Cigarette lighter
Hold the cigarette lighter (1) in depressed
position, to avoid damage.
• Press the cigarette lighter (1) down, once
the required temperature is reached, it
will automatically pop out again.
The socket of the cigarette lighter can be used to connect
other consumers with a rating of 12 Volt and max. 10 A.
This discharges the battery when the engine is stopped.
When using optional appliances use the specified plug.
3.2.8 Engine fault control lamp
The engine fault control lamp (1) light up if the engine oil
pressure is too low or in case of a fault.
See chapter 3.8
3.2.9 Charge control lamps
The charge control lamps (2) and (3) light up if the out-
put voltage from the three-phase alternator is unable to
charge the batteries.
See chapter 3.8
3
0
III
II
I
2
1
1
2
3
49