horsch 80910205, Operating Instructions Manual

Page: 146 / 218

2
3
1
13.6 Nozzle cleaning with com-
pressed air
The compressed air gun is located on the middle
section of the boom (next to terminal box). You can use
the gun to blow off contamination and loose parts in the
nozzles with compressed air.
Wear appropriate protective clothes as
instructed (see chapter 12).
13.7 Cleaning the suction filter
Clean the suction filter every day
after spraying.
1. Switch off the pump
2. Set the suction side to OFF
3. Open the drain plug on the suction filter bowl (1)
4. Loosen the spigot nut
5. Take off the filter bowl and pull out the filter element
6. Clean the filter element with water
7. Check the O-rings for damage
8. Reassemble the suction filter in reverse order
13.8 Cleaning the pressure filter
Ensure correct
assembly of O-rings
The pressure filter is located on the left hand side of the
boom tower.
In case of more coarse contamination unscrew the filter
cap. For this purpose set all switches on the Command-
er-Box to "OFF/CLOSED". Open the white pressure
filter head (2) with a special spanner (included in the
scope of delivery) and clean the filter element; reinsert
the element and screw the filter cap back on.
(3) Pressure filter cleaning connection.
146