horsch 80910205, Operating Instructions Manual

Page: 42 / 218

00380359
00385489
510 Nm
Order-No.
04003742 (1x)
Retighten the wheel
nuts / wheel bolts after
50 km or 10 hours.
Check and retighten at
regular intervals - see
maintenance overview.
Order-No.
04002625 (2x)
Endangerment by
crushing for the en -
tire body, caused by
remaining in the operating range of lowering
parts of the machine!
These endangerments can cause severe and
possibly also fatal injuries.
• Persons are not permitted to stay inside the
operating range of lowering parts on the ma-
chine.
• Expel persons out of the operating range of
lowering machine parts before you start to
lower such parts.
Order-No.
04002626 (2x)
Endangerment by
crushing for the
entire body, caused
by remaining under suspended loads or raised
machine parts!
These endangerments can cause severe and pos-
sibly also fatal injuries.
• Persons are not permitted to remain under sus-
pended loads or raised parts of the machine.
• Keep a sufficient safety distance from suspend -
ed loads or raised parts of the machine.
• Make sure that persons keep a sufficient safety
distance from suspended loads or raised parts
of the machine.
Order-No. Collective sticker
04002983 (1x)
The maximum operating pres -
sure in the hydraulic system is
200 bar.
Order-No.
Collective sticker
04002983 (1x)
Endangerment by
electric shock or
burn injuries caused by accidental touching of
overhead power lines or by accidently com -
ing too close to high voltage overhead power
lines!
This endangerment causes severe injury to
the entire body, or even death. When swinging
machine parts out and in keep a safe distance to
overhead power lines.
Order-No.
04003743 (1x)
The tightening torque
for wheel nuts / wheel
bolts is 510 Nm.
42