horsch 80910205, Operating Instructions Manual

Page: 46 / 218

3.2.1 Console switch and control lamps
1 - Travel system enable switch
2 - Parking brake enable switch
3 - General engine fault
4 - Charge control lamp 150A
5 - Charge control lamp II 65A
6 - General release for rear axle steering
7 - Steering type: All-wheel drive
8 - Steering type: Crab walk
Operation of enabling switch
The enabling switches are locked to pre -
vent accidental actuation.
To operate the enable switch (1) push the locking (2)
forward and press the release switch.
1
2
2 1
3
4
5
8 7 6
3.2.1.1 Enable switch: Travel drive
Actuation releases the travel drive (position I).
With the travel drive enabled (posi -
tion I), the engine cannot be started.
There should not be any persons in
the immediate danger zone around
the machine when actuating the travel
drive switch!
on
off
46