horsch 80910205, Operating Instructions Manual

Page: 98 / 218

9.13 Emergency releasing of park-
ing brake
Only to tow out of the danger zone. Do
not tow over longer distances.
During maintenance work secure the
machine with wheel chocks against
accidental rolling.
If the machine is unable to generate the oil pressure
required to release the parking brake, the parking brake
can also be manually released.
• Unscrew the covering cap (1)
• Loosen the counter nut (2)
• Back out the setscrew, until the parking brake is
released
9.13.1 Adjusting the parking brake
Adjust the parking brake when released (oil pressure
available):
• Turn in the setscrew, until higher resistance can be
felt. The brake linings now touch the brake disc.
• Now back out the set screw for half a turn. This
will leave a clearance of 1mm between linings and
disc.
• Retighten the counter nut (2).
• Assemble the covering cap (1)
1
2
1
9.12 Towing
The vehicle can be towed by the towing eye or by the
towbar eye at the rear of the vehicle. For this purpose
the axle transfer box must be switched to neutral in
case of a travel system failure.
Setting the neutral position:
• Switch to 2nd gear
• Close ball valve (1)
• Switch to 1st gear: The gearbox is now in neutral
position.
• After towing the vehicle open the ball valve (1)
again.
1
2
98