horsch 80910205, Operating Instructions Manual

Page: 141 / 218

13 Cleaning, service and maintenance of the crop pro-
tection sprayer
WARNING
Danger of crushing, shearing, cutting, cutting off, being caught, winding up, being pulled
in and impact caused by
•
accidental lowering of lifted, unsecured machine parts.
•
accidental starting and unintended rolling of the Trac/trailer combination.
Secure Trac and machine against accidental starting and unintended rolling before you start
cleaning, maintenance or repair work on the machine.
WARNING
Danger of crushing, shearing, cutting, cutting off, being caught, winding up, being pulled
in and impact caused by unprotected danger spots!
•
Assemble all safety features you previously disassembled for the purpose of cleaning,
maintenance and repair work on the machine.
•
Replace defective protections with new ones.
DANGER
•
When performing maintenance, repair and service work strictly comply with the
safety notes, especially chapter 12 "Spraying"!
•
The performance of maintenance and repair work under moveable parts of the ma -
chine, which are in raised position, is only permitted, if these machine parts have
been positively secured against accidental lowering.
Before each start-up
1. Check hoses / pipes and connecting parts for apparent faults / leaking connections.
2. Remedy chafed sections on hoses and pipes.
3. Immediately replace worn or damaged hoses and pipes.
4. Seal leaking connections immediately.
Service and maintenance
•
Regular and proper maintenance will keep your self-propelled crop protection sprayer for a long
time in an operable state and prevent premature wear. Regular and proper maintenance is a
prerequisite for the acceptance of warranty claims.
•
Ensure that regular tests and inspections are always carried out to schedule, as specified in the
operating instructions.
•
Prior to performing maintenance and servicing work, ensure that the machine is positioned on
firm, level ground and that it is properly secured against rolling away.
•
Use only original spare parts and spare hoses from HORSCH LEEB AS.
For assembly you should generally use hose clamps made of V2A.
141