horsch 80910205, Operating Instructions Manual

Page: 170 / 218

Tyre assembly
• Remove any traces of corrosion from the tyre seat areas on the rim before you start to assemble a
new / different tyre.
When travelling, traces of corrosion can cause damage to the rims.
• When assembling new tyres always use new tubeless valves or tubes.
• Always screw valve caps with integrated seal on the valves.
510 Nm
Never use the self-propelled sprayer with
the tyre pressure that is commonly used
to ship the tyres. Leave the valve caps
on the valves to protect against dirt.
Check the tyre pressure frequently!
14.16.1 Fastening of wheels
Retighten the wheel fastening screws with 510 Nm after
the first hour and then after 20 to 25 operating hours.
170