horsch 80910205, Operating Instructions Manual

Page: 23 / 218

Engine
Water cooled MTU diesel engine Type OM 936 EU stage IV
Power (kW/PS) 210 / 285
Number of cylinders / cooling 6 / Water / Turbo with charge air cooling
Displacement (cm³) 7700
Rated speed (rpm) 2 400
Max. torque (Nm/rotation speed) 1150 / 1200-1600
Control electronic EMR
Tank contnt Diesel/AdBlue approx. 400 litres / 25 litres
Gearbox
Gearbox type Hydroshift
Working ranges Field / road
Transmission hydrostatic stepless
Speeds Field: 0-23 km/h
Road 0-40 km/h or 0-50 km/h. Top speed always at 1.500 rpm possible
All-wheel drive permanent all-wheel drive with differential compensation, lockable under load
Undercarriage/axles
Front axle FA Outer planetary axle, steerable
Rear axle RA Outer planetary axle, rigid or steerable
Suspension FA and RA pneumatic with level control and active side stabilization
Steering
Front axle hydraulic
Rear axle hydraulic-electric steering (with steerable RA) automatic centring and interlocking
during road travel
Steering types Only FA / all-wheel steering / crabwalk / RA manual / via foot switch for headland
Brake system
Service brake FA and RA with integrated wet multi-disc brake
Parking brake Cardanic brake with spring accumulator, hydraulically operated
Hydraulic system
Main pump Variable displacement pump, volume controlled LS
Power (ltr./min) 200
Working pressure (bar) 200
Interfaces pressure / return flow / LS-signal
Additional pumps steering pump (50 l/min for RA
Automotive electric system
Operating voltage 12V/24V,
Battery 3 x dry batteries, Optima 12V / 50 Ah
Three-phase alternator 14V 160A / 28V 150A
Starter 24V / 5,5kW
23