'61HN252' by American Honda Motor Co. - Page 153 of 540
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
1 of 1
3/9/2008 10:48 PM
[2005-2008] [TRX500 FA/FGA]
ENGINE REMOVAL/INSTALLATION
SERVICE INFORMATION
GENERAL
· When removing/installing the engine, tape the frame around the engine beforehand to protect the frame.
· The following components require engine removal for service:
sub-transmission
(page 12-12)
crankshaft and automatic transmission
(page 13-8)
SPECIFICATIONS
ITEM
SPECIFICATIONS
Engine dry weight
62.9 kg (138.7 lbs)
Engine oil capacity
After draining
4.4 liters (4.7 US qt, 3.9 lmp qt)
After draining/filter
4.6 liters (4.9 US qt, 4.0 lmp qt)
change
After disassembly
5.2 liters (5.5 US qt, 4.6 lmp qt)
TORQUE VALUES
Left lower engine hanger bracket
32 N·m (3.3 kgf·m, 24 lbf·ft)
bolt
Lower engine hanger nut
(left and right)
54 N·m (5.5 kgf·m, 40 lbf·ft)
Upper engine hanger bracket bolt
(frame side)
54 N·m (5.5 kgf·m, 40 lbf·ft)
(engine side)
32 N·m (3.3 kgf·m, 24 lbf·ft)
Engine oil temperature (EOT) sensor
18 N·m (1.8 kgf·m, 13 lbf·ft)
Gearshift lever linkage arm pivot
27 N·m (2.8 kgf·m, 20 lbf·ft)
Apply locking agent to
bolt
the threads
Differential case mounting bolt
(10 mm)
44 N·m (4.5 kgf·m, 33 lbf·ft)
Differential case mounting bracket
(8 mm)
22 N·m (2.2 kgf·m, 16 lbf·ft)
bolt
Differential mounting nut
(10 mm)
44 N·m (4.5 kgf·m, 33 lbf·ft)
Lock nut: replace with a
new one
Differential mounting nut
(8 mm)
22 N·m (2.2 kgf·m, 16 lbf·ft)
7-3
