'61HN252' by American Honda Motor Co. - Page 109 of 540
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
1 of 1
3/9/2008 10:43 PM
[2005-2008] [TRX500 FA/FGA]
LUBRICATION SYSTEM
ASSEMBLY
Dip all parts in clean engine oil.
PUMP BODY A
OUTER ROTORS A
PUMP BODY B
RELIEF VALVE
PUMP SHAFT
SPRING
SPRING SEAT
SPACER
DOWEL PIN
DRIVE PIN
PUMP BODY C
INNER ROTORS A
INNER ROTORS B
OUTER ROTORS B
INNER ROTORS C
OUTER ROTORS C
Install the pump shaft into pump body A with the
PUMP BODY A
threaded hole end facing toward pump body A.
Install inner rotor A onto the shaft with the drive pin
grooves facing out.
PUMP SHAFT
Install outer rotor A.
Install the drive pin into the pump shaft hole and set
the drive pin in the inner rotor grooves.
PUMP BODY B
Install pump body B.
INNER AND OUTER ROTORS A
DRIVER PIN
Install the two dowel pins.
DOWEL PIN
DRIVER PIN
Install the drive pin and inner rotor B, aligning the
pin grooves with the drive pin.
Install outer rotor B.
DOWEL PIN
INNER AND OUTER ROTORS B
4-15