6–4
Rapid fFN 10Q
System User Manual
Section 6 — Printer
REMOVING AN EMPTY LABEL ROLL
When the printer is out of labels, the power light will fl ash.
1. Leave the printer turned on and open the cover. The last label on the roll may be connected to the
corrugated core by a piece of tape. If it is, use scissors to cut the label between the roll and the label feed
slot. Remove the label spool from the printer.
2. Press the Form Feed button on the printer’s front panel to eject the remaining label stock from the printer.
3. Slide off the right side of the spool and remove the corrugated core.
4. Load a new roll of labels (see Loading Printer Labels for instructions).
Summary of Contents for Rapid fFN 10Q
Page 1: ...User Manual...
