6–2
Rapid fFN 10Q
System User Manual
Section 6 — Printer
5. Refer to Figure 1 while following these instructions:
Slide the roll of labels over the spool from right to left as shown
in Figure 1(a). Then reattach the right side of the spool and push
it fi rmly against the label roll as shown in Figure 1(b). Make sure
there is no gap between the roll and the spool. The labels
will feed from the bottom of the roll.
6. Ensure the power cord is connected. Turn on the printer by plugging
it in to a power outlet. The power light will fl ash and the printer motor
will run as it looks for labels to feed.
7. Holding the spool of labels in one hand, use the other hand to feed
the free end of the roll into the feed slot on the inside of the printer,
Figure 1
a
b
Summary of Contents for Rapid fFN 10Q
Page 1: ...User Manual...
