4–19
Rapid fFN 10Q
System User Manual
Section 4 —
Software Functions — LIQUID CONTROLS
If the sample is not added and ENTER not pressed within allotted
time, the test process cannot continue. This message will be
displayed. Press ESC to return to the Main Menu. No record of the
test will be held in memory.
Once the sample is added, the analyzer will begin a 7-minute
incubation countdown. To abort the test, press ESC. Pressing ESC
will terminate the test and the data will be lost.
Upon completion of the incubation period, the analyzer will begin the
analysis of the cassette. Do not disturb the analyzer until the results
are displayed. The analysis will take approximately 2–3 minutes.
TEST WARNING:
This message will be displayed if ESC was
pressed during testing. Lines 1 and 2 will fl ash prompting the user
to select ENTER to continue test or ESC to end test. This message
will hold for 5 seconds and then revert back to its respective screen.
If the test is cancelled, a new cassette will be required to repeat the
test.
SAMPLE NOT ADDED
WITHIN ALLOTTED TIME
ESC-MAIN MENU
TEST IN PROCESS
DO NOT REMOVE
CASSETTE
6 MIN 56 SEC
TEST IN PROCESS
ANALYZING
DO NOT REMOVE
CASSETTE
CANCEL TEST?
ENTER-CONTINUE
ESC-MAIN MENU
6 MIN 37 SEC
Summary of Contents for Rapid fFN 10Q
Page 1: ...User Manual...
