6–3
Rapid fFN 10Q
System User Manual
Section 6 — Printer
as shown in Figure 2. (If it is easier, rest the labels on the top edge of the printer, freeing both hands to feed
the labels.)
8. Push the end into the slot until a slight resistance is felt. Continue
pushing gently. The label feed motor will feed the end and carry the
labels through the printer and out the exit slot. The printer will stop
feeding automatically at the end of the fi rst label. If the motor stops
running while still in the process of loading labels, press the form
feed button to get it started again. (To protect itself the motor stops
running every few seconds.)
9. Insert the label spool into the printer. The spool will fi t into the raised
shoulder slots in the printer.
10. Close the cover and the printer is ready to print labels.
Figure 2
Summary of Contents for Rapid fFN 10Q
Page 1: ...User Manual...
