Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 322

Page: 322 / 619

Advanced

[ Advanced > DHCP Server > Lease Table ]

321

RM GUI GRS

Release

8.0

09/2019

7.2.3

DHCP Server Lease Table

[ Advanced > DHCP Server > Lease Table ]

This dialog displays the status of IP address leasing on a per port basis.

Table

Port

Displays the port number to which the address is currently being leased.

IP address

Displays the leased IP address to which the entry refers.

Status

Displays the lease phase.

According to the standard for DHCP operations, there are 4 phases to leasing an IP address:

Discovery, Offer, Request, and Acknowledgement.

Possible values:



bootp

A DHCP client is attempting to discover a DHCP server for IP address allocation.



offering

The DHCP server is validating that the IP address is suitable for the client.



requesting

A DHCP client is acquiring the offered IP address.



bound

The DHCP server is leasing the IP address to a client.



renewing

The DHCP client is requesting an extension to the lease.



rebinding

The DHCP server is assigning the IP address to the client after a successful renewal.



declined

The DHCP server denied the request for the IP address.



released

The IP address is available for other clients.

Remaining lifetime

Displays the time remaining on the leased IP address.

Leased MAC address

Displays the MAC address of the device leasing the IP address.

Gateway

Displays the Gateway IP address of the device leasing the IP address.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands