Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 11

Page: 11 / 619

Notes on the Graphical User Interface

RM GUI GRS

Release

8.0

09/2019

Notes on the Graphical User Interface

The Graphical User Interface of the device is divided as follows:



Navigation area



Dialog area



Buttons

Navigation area

The Navigation area is located on the left side of the Graphical User Interface.

The Navigation area contains the following elements:



Toolbar



Filter



You have the option of collapsing the entire Navigation area, for example when displaying the

Graphical User Interface on small screens. To collapse or expand, you click the small arrow at the

top of the navigation area.

Toolbar

The toolbar at the top of the navigation area contains several buttons.

•

When you position the mouse pointer over a button, a tooltip displays further information.

•

If the connection to the device is lost, then the toolbar is grayed out.

The device automatically refreshes the toolbar information every 5 seconds.

Clicking the button refreshes the toolbar manually.

When you position the mouse pointer over the button, a tooltip displays the following information:



User:

Name of the logged in user



Device name:

Name of the device

Clicking the button opens the

Device Security > User Management

dialog.

When you position the mouse pointer over the button, a tooltip displays the summary of the

Diagnostics > System > Configuration Check

dialog.

Clicking the button opens the

Diagnostics > System > Configuration Check

dialog.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands