Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 213

Page: 213 / 619

Switching

[ Switching > L2-Redundancy > Spanning Tree > Port ]

212

RM GUI GRS

Release

8.0

09/2019

Possible values:



marked

(default setting)

The automatic detection is active.

After the installation of the connection and after 1.5 ×

Hello time [s]

, the device sets the port to

the

forwarding

status (default setting 1.5 × 2 s) if the port did not receive any STP-BPDUs

during this time.



unmarked

The automatic detection is inactive.

After the installation of the connection, and after

Max age

the device sets the port to the

forwarding

status.

(default setting: 20 s)

Oper edge port

Displays whether an end device or an STP bridge is connected to the port.

Possible values:



marked

An end device is connected to the port. The port does not receive any STP-BPDUs.



unmarked

An STP bridge is connected to the port. The port receives STP-BPDUs.

Oper PointToPoint

Displays whether the port is connected to an STP device via a direct full-duplex link.

Possible values:



true

The port is connected directly to an STP device via a full-duplex link. The direct, decentralized

communication between 2 bridges enables short reconfiguration times.



false

The port is connected in another way, for example via a half-duplex link or via a hub.

Port BPDU filter

Activates/deactivates the filtering of STP-BPDUs on the port explicitly.

The prerequisite is that the port is a manually specified edge port. For these ports, the checkbox in

the

Admin edge port

column is marked.

Possible values:



marked

The BPDU filter is active on the port.

The function excludes the port from

Spanning Tree

operations.

–

The device does not send STP-BPDUs on the port.

–

The device drops any STP-BPDUs received on the port.



unmarked

(default setting)

The BPDU filter is inactive on the port.

You have the option to globally activate the BPDU filter for every edge port. See the

Switching >

L2-Redundancy

> Spanning Tree > Global

dialog,

Bridge configuration

frame.

If the

BPDU filter (all admin edge ports)

checkbox is marked, then the BPDU filter is still active on

the port.

BPDU filter status

Displays whether or not the BPDU filter is active on the port.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands