Hirschmann GREYHOUND GRS1020, Reference Manual

Page: 553 / 619

Operation diagnosis
13.11 Reports
213
UM Config GRS
Release 8.0 09/2019
13.11.3 System Log
The device lets you call up a log file of the system events. The table in the
Diagnostics > Report >
System Log dialog lists the logged events.
Perform the following steps:
Note: You have the option to also send the logged events to one or more Syslog servers.
13.11.4 Audit Trail
The
Diagnostics > Report > Audit Trail
dialog contains system information and changes to the device
configuration performed through the Command Line Interface and SNMP. In the case of device
configuration changes, the dialog displays Who changed What and When. To log changes to the
device configuration, use in the
Diagnostics > Report > Audit Trail
dialog the functions
Log SNMP get
request
and
Log SNMP set request
.
The
Diagnostics > Syslog
dialog lets you specify up to 8 Syslog servers to which the device sends
Audit Trails.
No. Server IP Port Max. Severity Type Status
----- -------------- ----- -------------- ---------- -------
1 10.0.1.159 514 error systemlog active
configure
Change to the Configuration mode.
logging snmp-requests get operation
Logs SNMP GET requests.
logging snmp-requests get severity 5
The value
5
specifies the severity level of the event
that the device logs in case of SNMP GET
requests. The value
5
means Notice .
logging snmp-requests set operation
Logs SNMP SET requests.
logging snmp-requests set severity 5
The value
5
specifies the severity level of the event
that the device logs in case of SNMP SET
requests. The value
5
means Notice .
exit
Change to the Privileged EXEC mode.
show logging snmp
Display the SNMP logging settings.
Log SNMP GET requests : enabled
Log SNMP GET severity : notice
Log SNMP SET requests : enabled
Log SNMP SET severity : notice

To update the content of the log, click “Reload”.

To search the content of the log for a key word, click “Search“.

To archive the content of the log as an html file, click “Save”.