Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 20

Page: 20 / 619

Basic Settings

[ Basic Settings > System ]

RM GUI GRS

Release

8.0

09/2019

Temperature [°C]

Displays the current temperature in the device in °C.

You activate the monitoring of the temperature thresholds in the

Diagnostics > Status Configuration >

Device Status

dialog.

Upper temp. limit [°C]

Specifies the upper temperature threshold in °C.

The “Installation” user manual contains detailed information about setting the temperature

thresholds.

Possible values:



-99..99

(integer)

If the temperature in the device exceeds this value, then the device generates an alarm.

Lower temp. limit [°C]

Specifies the lower temperature threshold in °C.

The “Installation” user manual contains detailed information about setting the temperature

thresholds.

Possible values:



-99..99

(integer)

If the temperature in the device falls below this value, then the device generates an alarm.

LED status

This frame displays the states of the device status LEDs at the time of the last update. The

“Installation” user manual contains detailed information about the device status LEDs.

Parameters

Color Meaning

Status

There is currently no device status alarm. The device status is OK.
There is currently at least one device status alarm. Therefore, see the

Device status

frame above.

Power

Device variant with 2 power supply units:

Only one supply voltage is active.
Device variant with 1 power supply unit:

The supply voltage is active.

Device variant with 2 power supply units:

Both supply voltages are active.

The device is neither operating as a

MRP

ring manager nor as a

DLR

supervisor.
Loss of redundancy reserve.

The device is operating as a

MRP

ring manager.

Redundancy reserve is available.

The device is operating as a

MRP

ring manager.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands